Super-Grip Strapless Suspenders wrap completely around your waist at the desired position you want you pants, skirt, shorts, to be. Our Strapless Suspenders are made from a specially formulated latex compound that has an exceptional gripping quality. Unlike traditional suspenders with straps, our strapless suspenders are placed over your shirt and under your pants making them invisible. Your shirt actually becomes the straps that hold everything in place.
(1) Pull Suspender around your waist with the pre-attached Velcro facing forward. Be certain that you place Suspender in the desired position that you want your pants to be.
(2) Pull Suspender snug around your waist and overlap Velcro marking position with forefinger. Be sure that Suspender is snug and not too tight. You should have to pull Suspender slightly past the Velcro. With a pair of scissors cut off the excess Suspender.
(3) Attach the included hook Velcro to the Suspender on the opposite side of the pre-attached Velcro pad. IMPORTANT: We highly recommend using the Super Glue that is included with your product purchase to attach the Velcro hook side. Place a small drop of Super Glue onto the adhesive side of the Velcro. Put a small drop close to each corner and one in the center of the Velcro.
TIP: With the Velcro facing up on your table place the Suspender down onto the Velcro over the Super Glue. Turn over and then push on each corner with your finger until some of the glue squeezes out around the edges. Keep your fingers out of the actual glue. Allow the glue to dry at least 2 hours prior to use. Make sure the glue is completely dry before using.
(4) Wrap the Suspender completely around your waist and hook together with the Velcro. Suspender should be in the desired position you want your pants to be.
(5) Pull pants up over Suspender and button as normal. Note that the bottom edge of the waist liner should be placed over the top edge of the Suspender.
That’s It Enjoy..